Jump to content

EU Centre of ExcellenceISO 9001

ERCIMW3C MemberFraunhofer Project Center

János Nacsa, Ph.D., senior research fellow
János Nacsa
Address: 1111 Budapest, Kende u. 13-17.
Room number: K 421
Phone: +36 1 279 6268
Fax: +36 1 4667503
E-mail: nacsa.janosEZT_TOROLJE_KI@EZT_TOROLJE_KIsztaki.hu
Department: Research Laboratory on Engineering & Management Intelligence

Research Interests
   * Application of AI in manufacturing
   * Intelligent Open controllers
   * Industry 4.0 - Internet of Things
   * Intelligent decision support
   * Automation of advanced productions & processes
   * Advanced robot applications

Publications

[order by time] [order by categories ]

2018.

Human robot collaboration in the MTA SZTAKI learning factory facility at Gyor
Authors: Kemény, Zsolt; Beregi, Richárd József; Nacsa, János; Kardos, Csaba; Horvath, D
Date: 2018.
Published by: PROCEDIA MANUFACTURING (Volume no.: 23, Page: 105-110)
Expanding production perspectives by collaborating learning factories-perceived needs and possibilities
Authors: Kemény, Zsolt; Beregi, Richárd József; Nacsa, János; Glawar, R; Sihn, W
Date: 2018.
Published by: PROCEDIA MANUFACTURING (Volume no.: 23, Page: 111-116)

2015.

An intelligent decision support system in a nuclear power plant
Authors: Kovács, György; Nacsa, János
Editor: Nafisa, J
Date: 2015.
Published by: (Page: 1-6)

2013.

Some aspects of dynamic 3D representation and control of industrial processes via the Internet
Authors: Kopácsi, Sándor; Kovács, György; Nacsa, János
Date: 2013.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 64, Issue no.: 9, Page: 1282-1289)
Enhancing an old industrial robot arm's functions, using modern IT solutions
Authors: Szabó, D; Kristóf, T; Nacsa, János
Editor: S, n
Date: 2013.
Published by: CSIT’2013. Proceedings of the 15th international workshop on computer science and information technologies. Vienna-Budapest-Bratislava. Vol. 2. (Page: 103-106)
3D Inspection Technology for Industry
Authors: Kisari, Ádám; Haidegger, Géza; Nacsa, János; Ákos, G
Editor: S, n
Date: 2013.
Published by: Factory Automation 2013 (Page: 55-58)

2012.

Synchronized robot control for incremental sheet forming in the cyberspace
Authors: Kopácsi, Sándor; Nacsa, János; Kisari, Ádám
Date: 2012.
Published by: INFORMATIKA - A GÁBOR DÉNES FŐISKOLA KÖZLEMÉNYEI (Volume no.: XIV, Issue no.: 2, Page: 8-13)
Modelling and Control of Incremental Sheet Forming via a Virtual Environment
Authors: Kopácsi, Sándor; Nacsa, János
Editor: Pannon, University
Date: 2012.
Published by: Proceedings of the Factory Automation 2012 (Page: 108-112)
Capinfood Knowledge Portal
Authors: Nacsa, János; Kisari, Ádám
Date: 2012. 10. 14.
Published by: Manufacturing 2012 (Page: -1)

2011.

Planning of automated cell cultivation system
Authors: Kopácsi, S; Nacsa, János
Date: 2011.
Published by: INFORMATIKA - A GÁBOR DÉNES FŐISKOLA KÖZLEMÉNYEI (Volume no.: 13, Issue no.: 2, Page: 27-30)
Planning of Automated Cell cultivation System
Authors: Kopácsi, Sándor; Nacsa, János
Date: 2011.
Published by: INFORMATIKA - A GÁBOR DÉNES FŐISKOLA KÖZLEMÉNYEI (Volume no.: XIII, Issue no.: 2, Page: 27-30)
Hot incremental sheet forming of polymers in 3D internet collaboration
Authors: Paniti, Imre; Nacsa, János; Kopácsi, Sándor; Kisari, Ádám
Editor: Nagy, Zoltán
Date: 2011.
Published by: Factory Automation 2011 Conference (Page: 237-240)
Incremental sheet forming in cyberspace - a process oriented cognitive robotics application
Authors: Nacsa, János; Paniti, Imre; Kopácsi, Sándor
Date: 2011. 07. 07.
Published by: CogInfoCom 2011. 2nd international conference on cognitive infocommunications. Budapest, 2011. (Page: 1-5)

2010.

Requirement engineering for automated production of living cells
Authors: Nacsa, János; Kopácsi, Sándor
Editor: Haidegger, Géza
Date: 2010. 11.
Published by: Gyártás 2010 - Manufacturing 2010 "Manufuture". Budapest, 2010. (Page: 1-3)

2009.

A karbantartás szerepe az élettartamra tervezésben
Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Date: 2009.
Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35)
Role of maintenance in life-cycle engineering
Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Date: 2009.
Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23)
Managing maintenance in life-cycle engineering
Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Editor: Haidegger, Géza
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83)

2007.

Wireless technologies in future factories
Authors: Mezgár, István; Nacsa, János
Editor: Haidegger, Géza
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 49-54)
Tooling for novel ISF-incremental sheet forming
Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János
Editor: Dudás, I.; Szabó, O.; Varga, Gy.
Date: 2007.
Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274)
Mechatronic systems in sheet metal froming
Authors: Lammers, E.; Paniti, Imre; Haidegger, Géza; Nacsa, János
Editor: Haidegger, Géza
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 35-48)
Intelligens hálózatú gyártórendszerek
Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György
Editor: Haidegger, Géza
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116)
Agent-based Predictive Maintenance of Machine Tools
Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János
Date: 2007.
Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116)

2006.

Some robot application issues in sheet-metal forming
Authors: Kovács, György; Nacsa, János
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 475-480)
Robot applications in sheet-metal forming
Authors: Kovács, György; Nacsa, János
Editor: Yussupova, N; Hanebeck, U; Dillmann, R
Date: 2006.
Published by: CSIT 2006. Proceedings of the 8th international workshop on computer science and information technologies. Karlsruhe, 2006. Vol. 1. (Page: 22-27)

2005.

An intelligent wearable computer environment
Authors: Nacsa, János; Bognár, G.
Date: 2005.
Published by: Proceedings of the 6th international symposium of Hungarian researchers on computational intelligence. Budapest, 2005. (Page: 162-171)
Support of reengineering using wearable computers and the knowledge server concept
Authors: Nacsa, János
Editor: Fischer, X; Coutellier, D
Date: 2005.
Published by: Research in interactive design. Proceedings of virtual concept 2005. Biarritz, 2005. (Page: 115)
Knowledge management support for machine tool designers using expert enablers
Authors: Nacsa, János; Bueno, R.; Alzaga, A.; Kovács, György
Date: 2005.
Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 18, Issue no.: 7, Page: 561-571)
Interactive multimedia for supporting the quality of the production
Authors: Kovács, György; Haidegger, Géza; Nacsa, János
Date: 2005.
Published by: ERCIM NEWS (Issue no.: 62, Page: 44-45)

2004.

Interactive multimedia test scenarios in digital factory projects
Authors: Haidegger, Géza; Drozdik, Szilveszter; Bámer, B.; Kovács, György; Sárközy, F.; Nacsa, János; Biró, Zsolt; Kopácsi, Sándor; Boril, ZS; Szalay, T.; Anufriev, A.
Editor: Monostori, L
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455)
Intelligent wearable computer application using a knowledge server
Authors: Nacsa, János
Editor: Rudas, I
Date: 2004.
Published by: Intelligent Systems Design and Application. Proceedings of the IEEE 4th International Conference ISDA 2004, Budapest (Page: 315-318)

2003.

XPERTS - egy szerszámgéptervezést támogató szoftver megoldás
Authors: Nacsa, János
Date: 2003.
Published by: GEP (Volume no.: 54, Page: 53)
Wearable computer applications in manufacturing systems
Authors: Nacsa, János; Kovács, György
Editor: Tóth, T; Bikfalvi, P; Göndri Nagy, J
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 75-84)
REDEST - sharing experiences in the field of embedded software requirement gathering
Authors: Nacsa, János
Date: 2003.
Published by: ERCIM NEWS (Volume no.: 52, Page: 40-41)

2002.

Supporting SMEs in software requirement gathering in the field of automation
Authors: Nacsa, János; Kovács, György
Editor: Tar, JK
Date: 2002.
Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 415-420)
Intelligent, open architecture controller using knowledge server
Authors: Nacsa, János; Kovács, György; Haidegger, Géza
Editor: Orbán, PE
Date: 2002.
Published by: Sensors and Controls for Intelligent Manufacturing II. Intelligent Systems and Advanced Manufacturing. Boston, 2001. (Proceedings of SPIE 4563) (Page: 25-33)
Integrated framework for machine tool design
Authors: Nacsa, János
Editor: Penninger, A; Ziaja, GY; Vörös, G
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 659-663)
Application of experts enablers in the machinery engineering domain
Authors: Nacsa, János
Editor: Tar, JK
Date: 2002.
Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 248-253)

2001.

Logical communication levels in an intelligent flexible manufacturing system
Authors: Nacsa, János
Editor: Kovács, GL; Bertók, P; Haidegger, G
Date: 2001.
Published by: Digital enterprise challenges. Life-cycle approach to management and production. (Page: 37-42)
Intelligent open CNC system based on the knowledge server concept
Authors: Nacsa, János
Editor: Kovács, GL; Bertók, P; Haidegger, G
Date: 2001.
Published by: Digital enterprise challenges. Life-cycle approach to management and production. (Page: 37-42)
Intelligens, nyílt gépvezérlések és tudásmegosztási problémáik gyártórendszerekben
Authors: Nacsa, János
Date: 2001.
Published by: (Page: 105)
Comparison of three different open architecture controllers
Authors: Nacsa, János
Editor: Kovács, GL
Date: 2001.
Published by: MIM 2001. IFAC workshop on manufacturing, modelling, management and control. Preprints. Prague, 2001. (Page: 134-138)
Alert State Detection and Switching Order Generation at a 400/120 kV Substation using Knowledge Server
Authors: Nacsa, János; Kovács, György
Date: 2001.
Published by: Proc. of ISAP2001 Conference. (Intelligent Systems Application to Power Systems) (Length: 5 page)

2000.

Some problems of intelligent control of open CNCs and manufacturing cells
Authors: Kovács, György; Nacsa, János; Haidegger, Géza
Editor: Rudas, IJ; Tar, JK
Date: 2000.
Published by: IFAC symposium on artificial intelligence in real time control. AIRTC-2000. Preprints. Budapest, 2000. (Page: 21-28)
Intelligent machine tools based on the Gensym FIDA technology - a vision
Authors: Nacsa, János
Date: 2000.
Published by: GUS meeting. Gensym intelligent operations management. Barcelona, 2000.
Intelligent alert state detection and switching order generation at the 400/120 kV substation of the Paks Nuclear Power Plant
Authors: Nacsa, János; Kovács, György; Szederkényi, Gábor
Editor: Edelmayer, AM
Date: 2000.
Published by: 4th IFAC symposium on fault detection supervision and safety for technical processes. SAFEPROCESS 2000. Preprints. Budapest, 2000. Vol. 2. (Page: 1127-1132)

1999.

Intelligent functions in the 400/120 kV substation of the Paks Nuclear Power Plant
Authors: Nacsa, János
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 169-174)
An integrated CAD/CAM system for robotized arc welding
Authors: Nacsa, János; Kovács, György
Date: 1999.
Published by: STUDIES IN INFORMATICS AND CONTROL (Volume no.: 8, Issue no.: 1, Page: 7-18)
Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant
Authors: Kovács, György; Nacsa, János; Kopácsi, Sándor
Editor: Rudas, IJ
Date: 1999.
Published by: INES '99. 1999 IEEE international conference on intelligent engineering systems. Proceedings. Poprad, 1999. (Page: 479-484)
Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant
Authors: Nacsa, János; Kovács, György; Kopácsi, Sándor
Date: 1999.
Published by: IEEE PowerTech '99. International conference on electric power engineering. Budapest, 1999. (Page: Session 5: SCADA and AI tools: no. 2. : 1-2)
G2 based advisory system at the 400/120 kV substation of the Paks Nuclear Power Plant
Authors: Nacsa, János
Editor: Herrera Ruiz, G; Kovács, GL
Date: 1999.
Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 121-128)
Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems
Authors: Kovács, György; Kopácsi, Sándor; Nacsa, János; Haidegger, Géza; Groumpos, P.
Date: 1999.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189)

1998.

Simulation and control of FMS with application of expert systems
Authors: Kovács, György; Nacsa, János
Editor: Haidegger, G
Date: 1998.
Published by: Mexican-Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 83-89)
Intelligent control applications of open CNCs using G2
Authors: Nacsa, János; Haidegger, Géza; Kovács, György
Date: 1998.
Published by: Gensym Users Society conference proceedings. GUS'98. Newport, 1998. (Page: 1-8)
Intelligent control applications of open CNCs using G2
Authors: Nacsa, János; Haidegger, Géza; Kovács, György
Editor: Haidegger, G
Date: 1998.
Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1-9)
Applying SERCOS industrial control network for OSACA based CNC-s
Authors: Haidegger, Géza; Nacsa, János; Bausz, I.
Editor: Benyó, Z; Ivanyos, L
Date: 1998.
Published by: Proceedings of the symposium on FIELDBUS systems and application technics. Workshop of th INCO COPERNICUS project. Budapest, 1998. (Page: 85-92)

1997.

Some communication problems of KB-controlled manufacturing systems
Authors: Kovács, György; Nacsa, János
Date: 1997.
Published by: ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (Volume no.: 10, Issue no.: 2, Page: 225-230)
Shop-floor communication with OSACA-compliant controllers
Authors: Haidegger, Géza; Nacsa, János
Editor: Fuertes, JM; Juanole, G
Date: 1997.
Published by: WFCS '97. Proceedings. 1997 IEEE workshop on factory communication systems. Barcelona, 1997. (Page: 355-362)
Organization and technology management issues of joint European projects in a factory and in a research institute
Authors: Kovács, György; Nacsa, János; Lepsényi, I.
Date: 1997.
Published by: HUMAN SYSTEMS MANAGEMENT (Volume no.: 16, Issue no.: 3, Page: 231-242)
Factory communication systems to meet multi-media requirements
Authors: Haidegger, Géza; Nacsa, János
Editor: Fuertes, JM; Juanole, G
Date: 1997.
Published by: WFCS '97. Proceedings. 1997 IEEE workshop on factory communication systems. Barcelona, 1997. (Page: 317-320)
Built-in intelligent control applications of open CNCs
Authors: Nacsa, János; Haidegger, Géza
Editor: Monostori, L
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 388-392)

1996.

Some communication problems of KB controlled manufacturing systems
Authors: Kovács, György; Nacsa, János
Date: 1996.
Published by: Robotics towards 2000. 27th international symposium on industrial robots. Proceedings. Milan, 1996. (Page: 829-834)
An integrated CAD/CAM system for robotized arc welding
Authors: Nacsa, János; Kovács, György
Date: 1996.
Published by: Robotics towards 2000. 27th international symposium on industrial robots. Proceedings. Milan, 1996. (Page: 287-292)
Organisation and technology management issues of joint European projects in a factory and in a research institute
Authors: Kovács, György; Nacsa, János; Lepsényi, I.
Editor: Skordas, T; Hencsey, G
Date: 1996.
Published by: Quality, logistics and technology management. Proceedings of the ESPRIT-COPERNICUS symposium. Budapest, 1996. (Page: 238-252)
MMS communication in a robotized welding application
Authors: Nacsa, János
Editor: Rudas, IJ
Date: 1996.
Published by: Proceedings. 5th international workshop on robotics in Alpe-Adria-Danube region. RAAD'96. Budapest, 1996. Vol. 1. (Page: 235-238)
Intelligent control of manufacturing systems using open communications
Authors: Kovács, György; Nacsa, János; Haidegger, Géza
Editor: Gertler, JJ; Cruz, JB[JR]; Peshkin, M
Date: 1996.
Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. B. Manufacturing, social effects, bioproduction, biomedical, environment. (Page: 175-180)
Application of knowledge based control for an integrated robotized CAD/CAM arc welding system
Authors: Kovács, György; Nacsa, János
Editor: Gill, R; Syan, CS
Date: 1996.
Published by: CAD/CAM. Robotics and factories of the future. Proceedings of the 12th international conference. London, 1996. (Page: 381-386)

1995.

Some problems of knowledge based control of manufacturing systems using open communication
Authors: Nacsa, János; Kovács, György
Editor: Adey, RA; Ryevski, G; Tasso, C
Date: 1995.
Published by: Applications of artificial intelligence in engieneering X. AIENG '95. Tenth international conference. Udine, 1995 (Page: 349-356)
Towards intelligent and open control of manufacturing systems
Authors: Kovács, György; Nacsa, János
Editor: Borangin, TH; Dumitrache, I
Date: 1995.
Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 1. (Page: 165-169)
A simulation approach of assembly operations using SIMAN
Authors: Nacsa, János
Editor: Kaynak, O
Date: 1995.
Published by: Recent advances in mechatronics. ICRAM '95. Proceedings of the international conference. Istanbul, 1995. Vol. 2. (Page: 745-749)
A system to assist robotized welding for SME's
Authors: Nacsa, János; Kovács, György
Editor: Borangin, TH; Dumitrache, I
Date: 1995.
Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 2. (Page: 381-386)
SIMAN simulation of assembly operations in a furniture company
Authors: Nacsa, János
Date: 1995.
Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 355-364)
A PC-based offline programming system to assist robotized welding
Authors: Nacsa, János; Kovács, György; Weck, M.; Peper, S.; Szilvásy, A.; Vonderviszt, L.
Editor: Kaynak, O
Date: 1995.
Published by: Recent advances in mechatronics. ICRAM '95. Proceedings of the international conference. Istanbul, 1995. Vol. 1. (Page: 533-538)
Knowledge based control and open communication of advanced manufacturing systems
Authors: Kovács, György; Nacsa, János
Editor: Bera, H
Date: 1995.
Published by: 11th ISPA/IEE/IFAC international conference on CAD/CAM, robotics & factories of the future. Cars and FOF '95. Pereira, 1995. Vol. 1. (Page: 454-459)
Knowledge based control of manufacturing systems using open communication
Authors: Kovács, György; Nacsa, János
Editor: Roberts, PD; Ellis, JE
Date: 1995.
Published by: Large scale systems: theory and applications. IFAC/IFORS/IMACS symposium. Preprints. London, 1995. Vol. 2. (Page: 693-697)
Open systems in manufacturing, European and world-wide harmonized initiatives
Authors: Kovács, György; Nacsa, János
Date: 1995.
Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 1. (Page: 47-54)
A PC-based OSI system to assist robotized welding
Authors: Nacsa, János; Kovács, György
Editor: Barisani, KR; MacConaill, PA; Tierney, K
Date: 1995.
Published by: Opening productive partnerships. Concentrated efforts for Europe. Proceedings of the conference in integration in manufacturing. Vienna, 1995. (Advances in design and manufacturing 6.) (Page: 159-165)
CAD/CAM integration of an arc welding cell for one-of-a-kind production
Authors: Weck, M.; Peper, S.; Kovács, György; Nacsa, János; Szilvásy, A.; Vonderviszt, L.
Date: 1995.
Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 337-346)

1994.

A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems
Authors: Kovács, György; Mezgár, István; Nacsa, János; Kopácsi, Sándor; Gavalcová, D.
Editor: Brunnstein, K; Raubold, E
Date: 1994.
Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95)
A knowledge based and a hybrid simulation-scheduling system
Authors: Kovács, György; Mezgár, István; Nacsa, János; Kopácsi, Sándor; Gavalcová, D.
Date: 1994.
Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790)
A knowledge based and a hybrid system to evaluate flexible manufacturing systems
Authors: Kovács, György; Nacsa, János; Gavalcová, D.
Date: 1994.
Published by: 1994 IEEE international conference on robotics and automation. Proceedings. San Diego, 1994. Vol. 4. (Page: 3570-3575)
A knowledge based hybrid system to evaluate flexible manufacturing systems
Authors: Kopácsi, Sándor; Nacsa, János; Kovács, György
Date: 1994.
Published by: Proceedings of 1st international symposium on advances in intelligent computer integrated manufacturing systems. Seoul, 1994 (Page: 299-302)
A hybrid simulation-scheduler-quality control system for FMS
Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor; Nacsa, János; Groumpos, P.
Editor: Acar, M; Makra, J; Penney, E
Date: 1994.
Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662)
Steps towards real-time control using knowledge based simulation of flexible manufacturing systems
Authors: Nacsa, János; Kovács, György
Date: 1994.
Published by: 2nd IFAC workshop on computer software structures integrating AI/KBS systems in process control. Preprints. Lund, 1994 (Page: 88-91)
Concurrent engineering approach to support CIM reference model-based FMS design
Authors: Kovács, György; Mezgár, István; Nacsa, János
Date: 1994.
Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 1, Page: 17-27)
Interfacing G2 expert system shell with MMS protocol
Authors: Kovács, György; Nagy, G.; Gavalcova, D.; Nacsa, János
Date: 1994.
Published by: Gensym Users Society worldwide meeting. Washington, 1994 (Page: 1-13)
Ivhegesztő robotos CAD/CAM munkaállomás specifikálása
Authors: Haidegger, Géza; Nacsa, János; Vass, J.; Pepper, S.
Date: 1994.
Published by: IX. hegesztési szeminárium. Siófok, 1994 (Page: 119-120)
Communication problems of expert systems in manufacturing environment
Authors: Nacsa, János; Kovács, György
Editor: Crespo i Lorente, A
Date: 1994.
Published by: AIRTC'94. Symposium on artificial intelligence in real time control. Preprints. Valencia, 1994 (Page: 377-381)

1993.

Plans of the MAP training centre in Budapest
Authors: Kovács, György; Haidegger, Géza; Nacsa, János; Nagy, G.
Date: 1993.
Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91)
Monitoring of the milling process through neural network and fuzzy techniques
Authors: Markos, S.; Monostori, László; Nacsa, János; Szöllősi, G.
Editor: Mezgár, I; Bertók, P
Date: 1993.
Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 239-250)
Integrated application of real-time expert systems for FMS evaluation and control
Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor; Gavalcová, D.; Nacsa, János
Editor: Rzevski, G; Pastor, J; Adey, RA
Date: 1993.
Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847)
Application of expert and traditional program systems for FMS simulation, scheduling and control
Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor; Gavalcová, D.; Nacsa, János
Date: 1993.
Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362)

1992.

Nyíl rendszerek a mechatronikában
Authors: Haidegger, Géza; Nacsa, János; Nagy, G.
Date: 1992.
Published by: MECHATRONINFO'92 nemzetközi részvételű konferencia előadásainak anyaga (Page: 137-142)
OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban
Authors: Nacsa, János; Haidegger, Géza; Kovács, György
Date: 1992.
Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 3, Page: 164-166)
Neural networks for modelling and monitoring of manufacturing processes; milling
Authors: Monostori, László; Markos, S.; Krämer, S.; Nacsa, János; Szöllősi, G.
Date: 1992.
Published by: Proceedings of the 8th IMEKO Symposium on Technical Diagnostics Dresden, 1992 (Page: 502-512)
MAP activities in Hungary - setting up a "MAP Training Center
Authors: Nacsa, János; Haidegger, Géza
Date: 1992.
Published by: The enterprise networking event 1992. ENE'92. conference. Training others in OSI forum. Washington, 1992 (Page: 1-10)
MAP Training Center as a test-bed for OSI products in manufacturing
Authors: Nacsa, János; Haidegger, Géza; Kovács, György
Date: 1992.
Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 363-371)
First experiences with a MAP-networked CIM pilot plant
Authors: Kovács, György; Haidegger, Géza; Nacsa, János
Editor: Hencsey, G; Renner, G
Date: 1992.
Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 118-125)

New search