Jump to content

EU Centre of ExcellenceISO 9001

ERCIMW3C MemberFraunhofer Project Center

József Váncza, C.Sci., head of laboratory
József Váncza
Address: 1111 Budapest, Kende u. 13-17.
Mail address: 1111 Budapest, Kende u. 13-17.
Room number: K 416
Phone: +36 1 279 6299
Fax: +36 1 4667 503
E-mail: vancza.jozsefEZT_TOROLJE_KI@EZT_TOROLJE_KIsztaki.hu
Homepage: http://www.sztaki.mta.hu/~vancza
Department: Research Laboratory on Engineering & Management Intelligence

Education, degrees
1984 MSc in Electrical Engineering, Budapest Technical University
1994 PhD in Mechanical Engineering, Hungarian Academy of Sciences, Budapest,

Fields of interest
Artificial Intelligence and its application in Engineering and Production

Particular fields of interests: Computer-Aided Process Planning, Production Planning and Scheduling, Supply Chain Management, Knowledge-Based Systems, Multi-Agent Systems, Evolutionary Algorithms, Constraint Programming and Optimization

Teaching
Associate Professor, Budapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Manufacturing Science and Technology

Professional societies
Hungarian Academy of Sciences, Committee of Automation and Computing, member
CIRP (International Academy for Production Engineering Research), Fellow
IFAC TC5.2 Manufacturing Modelling for Management and Control, Member

Awards
Order of Merit of the Hungarian Republic, Knight Cross (2008)
Bolyai Research Fellowship of the Hungarian Academy of Sciences (1998)

Editorial boards
European Journal of Industrial Engineering, Inderscience, Associate editor
International Journal of Computer Integrated Manufacturing, Taylor & Francis, Associate editor
Advanced Engineering Informatics, Elsevier
CIRP Journal of Manufacturing Science and Technology, Elsevier
Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers, Part B, SAGE

Publications
Author or co-author of 145 publications: among others 36 international journal papers, 18
book chapters and 70 international conference papers. Co-editor of 3 books. (See http://www.sztaki.hu/~vancza for details.)
Number of citations (foreign authors only): 1100+.

Publications

[order by time] [order by categories ]

2018.

Scenario-based analysis in high-mix low-volume production environment
Authors: Gödri, I; Kardos, Csaba; Pfeiffer, András; Váncza, József
Date: 2018.
Published by: (Page: 173-179)
Value creation in production: Reconsideration from interdisciplinary approaches
Authors: Kaihara, T; Nishino, N; Ueda, K; Tseng, M; Váncza, József
Date: 2018.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 67, Issue no.: 2, Page: 791-813)
Multi-Modal Interfaces for Human–Robot Communication in Collaborative Assembly
Authors: Horváth, Gergely; Kardos, Csaba; Kemény, Zsolt; Kovács, András; Pataki, Balázs; Váncza, József
Date: 2018.
Published by: ERCIM NEWS (Issue no.: 114, Page: 15-16)
Mixed-initiative assembly planning combining geometric reasoning and constrained optimization
Authors: Kardos, Csaba; Váncza, József
Date: 2018.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 67, Issue no.: 1, Page: 463-466)
Context-dependent multimodal communication in human-robot collaboration
Authors: Kardos, Csaba; Kemény, Zsolt; Kovács, András; Pataki, Balázs; Váncza, József
Date: 2018.
Published by: PROCEDIA CIRP (Volume no.: 72, Page: 15-20)
Generating HumanWork Instructions from Assembly Plans
Authors: Kardos, Csaba; Kovács, András; Pataki, Balázs; Váncza, József
Date: 2018.
Published by: 28th International Conference on Automated Planning and Scheduling, ICAPS 2018, UISP 2018, Proceedings of the 2nd Workshop on User Interfaces and Scheduling and Planning (Page: 31-39)
Application of Generic CAD Models for Supporting Feature Based Assembly Process Planning
Authors: Kardos, Csaba; Váncza, József
Date: 2018.
Published by: PROCEDIA CIRP (Volume no.: 67, Page: 446-451)

2017.

Wireless Multi-Sensor Networks for Smart Cities: A Prototype System with Statistical Data Analysis
Authors: Csáji, Balázs Csanád; Kemény, Zsolt; Pedone, Gianfranco; Kuti, A; Váncza, József
Date: 2017.
Published by: IEEE SENSORS JOURNAL (Volume no.: 17, Issue no.: 23, Page: 7667-7676)
Human-robot collaborative assembly in cyber-physical production: Classification framework and implementation
Authors: Wang, XV; Kemény, Zsolt; Váncza, József; Wang, L
Date: 2017.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 66, Issue no.: 1, Page: 5-8)
Engineering Support Systems for Industrial Machines and Plants
Authors: Nonaka, Y; Nakano, T; Ohya, K; Enomoto, A; Erdős, Ferenc Gábor; Horváth, Gergely; Váncza, József
Editor: Redding, L; Roy, R; Shaw, A
Date: 2017.
Published by: (Page: 199-220)
Decomposition approach to optimal feature-based assembly planning
Authors: Kardos, Csaba; Kovács, András; Váncza, József
Date: 2017.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 66, Issue no.: 1, Page: 417-420)
Cyber-physical Manufacturing in the Light of Professor Kanji Ueda's Legacy
Authors: Váncza, József; Monostori, László
Date: 2017.
Published by: PROCEDIA CIRP (Volume no.: 63, Page: 631-638)

2016.

Production networks
Authors: Váncza, József
Editor: Laperrière, L; Reinhart, G
Date: 2016.
Published by: (Page: 1-8)
Towards Feature-based Human-robot Assembly Process Planning
Authors: Kardos, Csaba; Kovács, András; Váncza, József
Date: 2016.
Published by: PROCEDIA CIRP (Volume no.: 57, Page: 516-521)
Towards coordination in robust supply networks
Authors: Egri, Péter; Kádár, Botond; Váncza, József
Date: 2016.
Published by: IFAC-PAPERSONLINE (Volume no.: 49, Issue no.: 12, Page: 41-46)
Process planning and offline programming for robotic remote laser welding systems
Authors: Erdős, Ferenc Gábor; Kardos, Csaba; Kemény, Zsolt; Kovács, András; Váncza, József
Date: 2016.
Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 29, Issue no.: 12, Page: 1287-1306)
Process planning and offline programming for robotic remote laser welding systems
Authors: Erdős, Ferenc Gábor; Kardos, Csaba; Kemény, Zsolt; Kovács, András; Váncza, József
Date: 2016.
Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 29, Issue no.: 12, Page: 1287-1306)
Intelligent control for energy-positive street lighting
Authors: Kovács, András; Bátai, Roland; Csáji, Balázs Csanád; Dudás, Péter; Háy, Borbála; Pedone, Gianfranco; Révész, Tibor; Váncza, József
Date: 2016.
Published by: ENERGY (Volume no.: 114, Page: 40-51)
Online Learning for Aggregating Forecasts in Renewable Energy Systems
Authors: Csáji, Balázs Csanád; Kovács, András; Váncza, József
Date: 2016.
Published by: ERCIM NEWS (Issue no.: 107, Page: 40-41)
Optimized joint motion planning for redundant industrial robots
Authors: Erdős, Ferenc Gábor; Kovács, András; Váncza, József
Date: 2016.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 65, Issue no.: 1, Page: 451-454)
Economic development and wealth through globally competitive manufacturing systems
Authors: Cunha, P F; Váncza, József
Date: 2016.
Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 29, Issue no.: 12, Page: 1253-1254)

2015.

Recognition of complex engineering objects from large-scale point clouds
Authors: Erdős, Ferenc Gábor; Nakano, Takahiro; Horváth, Gergely; Nonaka, Youichi; Váncza, József
Date: 2015.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 64, Issue no.: 1, Page: 165-168)
Rapid deployment of remote laser welding processes in automotive assembly systems
Authors: Ceglarek, Dariusz; Colledani, Marcello; Váncza, József; Kim, Duck-Young; Marine, Charles
Date: 2015.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 64, Issue no.: 1, Page: 389-394)
Industry 4.0: a digitális technikák alkalmazásának új kihívásai és lehetőségei
Authors: Kardos, Csaba; Váncza, József
Date: 2015.
Published by: GÉPGYÁRTÁS (Volume no.: 55, Issue no.: 2, Page: 40-45)

2014.

Workstation Configuration and Process Planning for RLW Operations
Authors: Erdős, Ferenc Gábor; Kardos, Csaba; Kemény, Zsolt; Kovács, András; Váncza, József
Date: 2014.
Published by: PROCEDIA CIRP (Volume no.: 17, Page: 783-788)
A Robust Scheduling Approach for a Single Machine to Optimize a Risk Measure
Authors: Urgo, Marcello; Váncza, József
Date: 2014.
Published by: PROCEDIA CIRP (Volume no.: 19, Page: 148-153)
A cloud-based approach for WEEE remanufacturing
Authors: Wang, Lihui; Wang, Xi Vincent; Gao, Liang; Váncza, József
Date: 2014.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 63, Issue no.: 1, Page: 409-412)
An inverse economic lot-sizing approach to eliciting supplier cost parameters
Authors: Egri, Péter; Kis, Tamás; Kovács, András; Váncza, József
Date: 2014.
Published by: INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (Volume no.: xx, Issue no.: xx, Page: xx-xx)
An inverse economic lot-sizing approach to eliciting supplier cost parameters
Authors: Egri, Péter; Kis, Tamás; Kovács, András; Váncza, József
Date: 2014.
Published by: INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (Volume no.: 149, Page: 80-88)
Prediction and Robust Control of Energy Flow in Renewable Energy Systems
Authors: Csáji, Balázs Csanád; Kovács, András; Váncza, József
Date: 2014.
Published by: (Page: 3663-3669)
Monitoring and Controlling Energy-positive Public Lighting: the E+grid System
Authors: Csáji, Balázs Csanád; Háy, Borbála; Kovács, András; Pedone, Gianfranco; Révész, Tibor; Váncza, József
Date: 2014.
Published by: ERCIM NEWS (Volume no.: 98, Page: 36-37)
Adaptive Aggregated Predictions for Renewable Energy Systems
Authors: Csáji, Balázs Csanád; Kovács, András; Váncza, József
Date: 2014.
Published by: (Page: 132-139)
Agent Theory
Authors: Váncza, József
Editor: Laperrière, Luc; Reinhart, Gunther
Date: 2014.
Published by: (Page: 1-10)
Automatic off-line programming for remote laser welding workstation
Authors: Kardos, Csaba; Váncza, József
Date: 2014.
Published by: (Page: 61-70)
Design and management of manufacturing systems for production quality
Authors: Colledani, Marcello; Tolio, Tullio; Fischer, Anath; Iung, Benoit; Lanza, Gisela; Váncza, József
Date: 2014.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 63, Issue no.: 2, Page: 773-796)
Adapting CAD models of complex engineering objects to measured point cloud data
Authors: Erdős, Ferenc Gábor; Nakano, Takahiro; Váncza, József
Date: 2014.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 63, Issue no.: 1, Page: 157-160)

2013.

Planning of remote laser welding processes
Authors: Erdős, Ferenc Gábor; Kemény, Zsolt; Kovács, András; Váncza, József
Date: 2013.
Published by: PROCEDIA CIRP (Volume no.: 7, Page: 222-227)
A distributed coordination mechanism for supply networks with asymmetric information
Authors: Egri, Péter; Váncza, József
Date: 2013.
Published by: EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (Volume no.: 226, Issue no.: 3, Page: 452-460)
Milkrun Vehicle Routing Approach for Shop-floor Logistics
Authors: Gyulai, Dávid; Pfeiffer, András; Sobottka, T; Váncza, József
Date: 2013.
Published by: PROCEDIA CIRP (Volume no.: 7, Page: 127-132)
Inventory control in supply chains: Alternative approaches to a two-stage lot-sizing problem
Authors: Kovács, András; Egri, Péter; Kis, Tamás; Váncza, József
Date: 2013.
Published by: INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (Volume no.: 143, Issue no.: 2, Page: 385-394)
Efficient mechanism for aggregate demand prediction in the Smart Grid
Authors: Egri, Péter; Váncza, József
Editor: Klusch, M; Thimm, M; Paprzycki, M
Date: 2013.
Published by: Lecture Notes in Computer Science (Issue no.: 8076, Page: 250-263)
Generating alternative process plans for complex parts
Authors: Nonaka, Y; Erdős, Ferenc Gábor; Kis, Tamás; Kovács, András; Monostori, László; Nakano, T; Váncza, József
Date: 2013.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 62, Issue no.: 1, Page: 453-458)
Designing cooperation mechanisms for supply chains
Authors: Váncza, József; Egri, Péter
Date: 2013.
Published by: PROCEDIA CIRP (Volume no.: 12, Page: 306-311)

2012.

Scheduling with alternative routings in CNC workshops
Authors: Nonaka, Youichi; Erdős, Ferenc Gábor; Kis, Tamás; Nakano, Takahiro; Váncza, József
Date: 2012.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 61, Issue no.: 1, Page: 449-454)
Matching demand and system structure in reconfigurable assembly systems
Authors: Gyulai, Dávid; Vén, Zoltán; Pfeiffer, András; Váncza, József; Monostori, László
Date: 2012.
Published by: 45th CIRP Conference on Manufacturing Systems, 16-18 May 2012 Athens, University of Patras. Proceedings (Page: 660-665)
Matching Demand and System Structure in Reconfigurable Assembly Systems
Authors: Gyulai, Dávid; Vén, Zoltán; Pfeiffer, András; Váncza, József; Monostori, László
Date: 2012.
Published by: PROCEDIA CIRP (Volume no.: 3, Page: 579-584)
An Inverse Economic Lot-sizing Approach to Eliciting Supplier Cost Parameters
Authors: Egri, Péter; Kis, Tamás; Kovács, András; Váncza, József
Editor: Robert, W; Hans, H
Date: 2012.
Published by: Seventeenth International Working Seminar on Production Economics (Page: 197-207)
Channel coordination with the newsvendor model using asymmetric information
Authors: Egri, Péter; Váncza, József
Date: 2012.
Published by: INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (Volume no.: 135, Issue no.: 1, Page: 491-499)

2011.

Robust production control against propagation of disruptions
Authors: Tolio, T; Urgo, M; Váncza, József
Date: 2011.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 60, Issue no.: 1, Page: 489-492)
Supply network coordination by vendor managed inventory - A mechanism design approach
Authors: Egri, Péter; Váncza, József
Date: 2011.
Published by: AILog-2011. 2nd workshop on artificial intelligence and logistics (Page: 19-24)
How transparency can increase performance of production: Novel approaches and solutions (Abstract)
Authors: Monostori, László; Váncza, József
Date: 2011.
Published by: Factory Automation 2011 Conference, Győr, Hungary (Page: 14-15)
Coordinated planning and scheduling in supply chains with feedback mechanism
Authors: Váncza, József; Egri, Péter
Editor: Spath, D; Ilg, R; Krause, T; Spath, D; Ilg, R; Krause, T
Date: 2011.
Published by: Proceedings of the 21st International Conference on Production Research, ICPR 21 (Page: 1-6)
Collaborative planning with benefit balancing in dynamic supply loops
Authors: Egri, Péter; Döring, A; Timm, T; Váncza, József
Date: 2011.
Published by: CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (Volume no.: 4, Issue no.: 3, Page: 226-233)
Cooperative and responsive manufacturing enterprises
Authors: Váncza, József; Monostori, László; Lutters, D; Kumara, S; Tseng, M; Valckenaers, P; Van, Brussel
Date: 2011.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 60, Issue no.: 2, Page: 797-820)
Eco-labelling for sustainable manufacturing. (Abstract)
Authors: Váncza, József; Monostori, László
Editor: Nagy, Zoltán
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 195-196)

2010.

Planning in concert: a logistics platform for production networks
Authors: Váncza, József; Egri, Péter; Karnok, Dávid
Date: 2010.
Published by: International Journal of Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 4, Page: 297-307)
SPECIES-Co-evolution of products, processes and production systems
Authors: Tolio, T.; Ceglarek, D.; ElMaraghy, H. A.; Fischer, A.; Hu, S. J.; Laperriére, L.; Newman, S. T.; Váncza, József
Date: 2010.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 59, Issue no.: 2, Page: 672-693)
Digital enterprise solution for integrated production planning and control
Authors: Monostori, László; Erdős, Ferenc Gábor; Kádár, Botond; Kis, Tamás; Kovács, András; Pfeiffer, András; Váncza, József
Date: 2010.
Published by: Computers in Industry (Volume no.: 61, Issue no.: 2, Page: 112-126)
Collaborative planning with dynamic supply loops
Authors: Egri, Péter; Andre, Döring; Thorsten, Timm; Váncza, József
Editor: Sihn, Wilfried; Kuhlang, Peter
Date: 2010.
Published by: Proc. of the 43rd CIRP International Conference on Manufacturing Systems (Page: 844-851)
Collaborative planning with dynamic supply loops
Authors: Egri, Péter; Döring, A.; Timm, T.; Váncza, József
Editor: Sihn, W.; Kuhlang, P.
Date: 2010. 05. 26.
Published by: 43rd CIRP international conference on manufacturing systems. Sustainable production and logistics in global networks. Proceedings. Vienna, 2010. (Page: 844-851)
Exploiting repetitive patterns in practical scheduling problems
Authors: Kovács, András; Váncza, József
Editor: Sihn, W.; Kuhlang, P.
Date: 2010. 05. 26.
Published by: 43rd CIRP international conference on manufacturing systems. Sustainable production and logistics in global networks. Proceedings. Vienna, 2010. (Page: 868-875)
Approaches to inventory management in supply chains: a comparative study
Authors: Kovács, András; Egri, Péter; Kis, Tamás; Váncza, József
Date: 2010. 08. 23.
Published by: In Proc. of the 16th International Symposium on Inventories (Page: 107)

2009.

Real-time, cooperative enterprises for customised mass production
Authors: Monostori, László; Kis, Tamás; Váncza, József; Kádár, Botond; Erdős, Ferenc Gábor
Date: 2009.
Published by: International Journal of Computer Integrated Manufacturing (Volume no.: 22, Issue no.: 1, Page: 55-68)
Real-time, cooperative enterprises: Results of an industry - academia project
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2009.
Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 8-12)
Value creation and decision-making in sustainable society
Authors: Ueda, K.; Takenaka, T.; Váncza, József; Monostori, László
Date: 2009.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 58, Issue no.: 2, Page: 681-700)
Multi-stage stochastic programming for manufacturing system design
Authors: Terkaj, W.; Tolio, T.; Váncza, József
Date: 2009.
Published by: CARV 2009. 3rd international conference on changeable, agile, reconfigurable and virtual production. Proceedings. Munich, 2009. (Page: 590-601)
Benefit balancing - concepts for a better collaboration
Authors: Egri, Péter; Váncza, József; Gallego, M. A.
Editor: Dangelmaier, W.; Blecken, A.; Rüngener, N.
Date: 2009. 04. 02.
Published by: 11. Paderborner Frühjahrstagung. Nachhaltigkeit in flexiblen Produktions- und Liefernetzwerken. Paderborn, 2009. (Page: 151-162)
Rolling horizon stochastic programming approach to designing focused flexible manufacturing systems
Authors: Terkaj, W.; Tolio, T.; Váncza, József
Editor: Ceglarek, D.
Date: 2009. 09. 08.
Published by: ICMR 2009. 7th international conference on manufacturing research. Warwick, 2009. (Page: 234-241)
Novel IT approaches and solutions towards real-time, cooperative enterprises. Plenary paper
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Erdős, Ferenc Gábor; Karnok, Dávid; Egri, Péter
Date: 2009. 06. 05.
Published by: INCOM 2009. 13th IFAC symposium on information control problems in manufacturing. Preprints. Moscow, 2009. (Page: 724-731)
Coordination in supply chains using vendor managed inventory: how to balance the risks of uncertainty?
Authors: Egri, Péter; Váncza, József
Date: 2009. 10. 05.
Published by: CARV 2009. 3rd international conference on changeable, agile, reconfigurable and virtual production. Proceedings. Munich, 2009. (Page: 941-950)

2008.

A coordination mechanism for rolling horizon planning in supply networks
Authors: Váncza, József; Egri, Péter; Monostori, László
Date: 2008.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 57, Issue no.: 1, Page: 455-458)
Valós időben együttműködő vállalatok: egy ipari-akadémiai projekt eredményei
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2008.
Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 11-15)
Representation and navigation techniques for semi-structured knowledge in collaborating communities
Authors: Kemény, Zsolt; Erdős, Ferenc Gábor; Váncza, József
Editor: Bernard, Alain; Tichkiewitch, Serge
Date: 2008.
Published by: Methods and tools for effective knowledge-life-cycle management. (Page: 185-212)
Real-time, cooperative enterprises for customized mass production; challenges and solution approaches
Authors: Monostori, László; Váncza, József; Kis, Tamás; Erdős, Ferenc Gábor; Karnok, Dávid; Egri, Péter
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 13851-13856)
Komplexität der Bedarfsprognosen und ihre Wirkungen in kooperativen Logistiknetzwerken

2007.

Real-time, cooperative enterprises: challenges and results of an industry-academia project
Authors: Monostori, László; Salekovics, István; Váncza, József; Kis, Tamás; Kádár, Botond; Farkas, Zoltán
Editor: Monostori, László
Date: 2007.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 95-100)
A logistics framework for coordinating supply chains on unstable markets
Authors: Egri, Péter; Váncza, József
Editor: Cunha, P. F.; Maropoulos, P. G.
Date: 2007.
Published by: Digital enterprise technology. Perspective and future challenges. (Page: 59-66)
A risk sharing coordination mechanism for customized mass production
Authors: Egri, Péter; Váncza, József
Date: 2007.
Published by: 40th CIRP international seminar on manufacturing systems. Liverpool, 2007. (Page: 1-6. (CD))
Real-time, cooperative enterprises for customised mass production
Authors: Monostori, László; Kis, Tamás; Kádár, Botond; Váncza, József; Erdős, Ferenc Gábor
Date: 2007.
Published by: CARV 2007. 2nd international conference on changeable, agile, reconfigurable and virtual production. Proceedings. Toronto, 2007. (Page: 1067-1076. (CD))
Planning in concert: a logistics platform for production networks
Authors: Váncza, József; Egri, Péter; Karnok, Dávid
Editor: Maropoulos, P. G.; Newman, S. T.
Date: 2007.
Published by: DET 2007. 4th international conference on digital enterprise technology. Bath, 2007. (Page: 461-470. (CD))
Cooperative production networks - multiagent modeling and planning
Authors: Egri, Péter; Váncza, József
Date: 2007.
Published by: Acta Cybernetica (Volume no.: 18, Page: 223-238)
Organizing and running real-time, co-operative enterprises
Authors: Monostori, László; Fornasiero, R.; Váncza, József
Editor: Taisch, M.; Thoben, K-D.; Montorio, M.
Date: 2007.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 133-144)
Information sharing in cooperative production networks
Authors: Egri, Péter; Karnok, Dávid; Váncza, József
Editor: Monostori, László
Date: 2007. 11. 14.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 115-120)

2006.

Real-time, cooperative enterprises: management of changes and disturbances in different levels of production
Authors: Monostori, László; Váncza, József; Márkus, András; Kis, Tamás; Kovács, András; Erdős, Ferenc Gábor; Kádár, Botond; Viharos, Zsolt János
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Volume no.: 35, Issue no.: 4, Page: 351-359)
Real-time, cooperative enterprises
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 1-8)
Real-time, cooperative enterprises: requirements and solution approaches
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Dolgui, A; Morel, G; Pereira, CE
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 1. (Page: 561-566)
Real-time, cooperative enterprises: requirements and solution approaches
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Dolgui, A; Morel, G; Pereira, CE
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Preprints. Vol. 1. Saint-Etienne, 2006. (Page: 591-596)
A logistics framework for coordinating supply chains on unstable markets
Progressive solutions: a simple but efficient dominance rule for practical RCPSP
Authors: Kovács, András; Váncza, József
Date: 2006.
Published by: Lecture Notes in Computer science (Volume no.: 3990, Page: 139-151)
Plan construction and optimization in a multi-agent framework for computer-aided process planning
Authors: Váncza, József; Dépincé, P.; Brossard, P.
Editor: Teti, R
Date: 2006.
Published by: CIRP ICME-5. 5th international seminar on intelligent computation in manufacturing engineering. Ischia, 2006. (Page: 287-292)
Configurable logistics platform to handle supply turbulences - a case study in a focal supply network
Authors: Váncza, József; Egri, Péter; Wiendahl, HH
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 281-288)
Cooperative planning by coordinating the supply channel
Authors: Egri, Péter; Váncza, József
Date: 2006.
Published by: Production Systems and Information Engineering (Volume no.: 4, Issue no.: 1, Page: 3-19)
Coordinating supply networks in customized mass production - a contract-based approach
Authors: Váncza, József; Egri, Péter
Date: 2006.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 55, Issue no.: 1, Page: 489-492)
Incentives for cooperative planning in focal supply networks
Agent-based systems for manufacturing
Authors: Monostori, László; Váncza, József; Kumara, SRT
Date: 2006.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 55, Issue no.: 2, Page: 697-720)

2005.

Proterv-II: an integrated production planning and scheduling system
Authors: Kovács, András; Egri, Péter; Kis, Tamás; Váncza, József
Date: 2005.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 3709, Page: 880)
Real-time, cooperative enterprises: management of changes and disturbances on different levels of production
Authors: Monostori, László; Váncza, József; Márkus, A.; Kis, Tamás; Kovács, András; Erdős, P.; Kádár, Botond; Viharos, Zsolt János
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1-6)
Structural exploration of constraint-based scheduling problems
Authors: Kovács, András; Márkus, A.; Váncza, József
Date: 2005.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS (Volume no.: 34, Issue no.: 4, Page: 291-298)
Project-oriented approach to production planning and scheduling in make-to-order manufacturing
Authors: Egri, Péter; Kovács, András; Márkus, A.; Váncza, József
Date: 2005.
Published by: PRODUCTION SYSTEMS AND INFORMATION ENGINEERING (Volume no.: 2, Page: 23-36)
Organizing and running real-time, cooperative enterprises
Authors: Monostori, László; Fornasiero, R.; Váncza, József
Editor: Taisch, M; Thoben, K-D
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 144-157)
Cooperative planning in the supply network - a multiagent organization model
Authors: Egri, Péter; Váncza, József
Date: 2005.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 3690, Page: 346-356)
Integrált termeléstervezés és ütemezés megrendelésre történő gyártásban
Authors: Kovács, András; Egri, Péter; Váncza, József
Date: 2005.
Published by: GÉPGYÁRTÁS (Volume no.: 45, Issue no.: 1, Page: 45-47)
Computer aided process planning for sheet metal bending: a state of the art
Authors: Duflou, JR; Váncza, József; Aerens, R.
Date: 2005.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 56, Issue no.: 7, Page: 747-771)

2004.

A project-oriented decision support system for production planning in make-to-order manufacturing
Authors: Kis, T.; Erdős, G.; Márkus, A.; Váncza, József
Date: 2004.
Published by: ERCIM NEWS (Issue no.: 58, Page: 66-67)
Structural exploration of constraint-based scheduling problems
Authors: Kovács, A.; Márkus, A.; Váncza, József
Editor: Monostori, L
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 433-439)
Sequencing for process planning by genetic algorithms
Authors: Dépincé, PH; Lancon, N.; Váncza, József
Editor: Gogu, G
Date: 2004.
Published by: Recent advances in integrated design and manufacturing in mechanical engineering (Page: 33-42)
Completable Partial solutions in constraint programming and constraint-based scheduling
Authors: Kovács, A.; Váncza, József
Date: 2004.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 3258, Page: 332-346)
Aggregation - the key to integrating production planning and scheduling
Authors: Váncza, József; Kis, T.; Kovács, A.
Date: 2004.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 53, Issue no.: 1, Page: 377-380)

2003.

Towards the realisation of digital enterprises
Authors: Monostori, László; Váncza, József; Márkus, A.; Kádár, Botond; Viharos, Zsolt János
Editor: Weber, C; Bley, H; Hirt, G
Date: 2003.
Published by: Progress in Virtual Manufacturing Systems. Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, 2003 (Page: 99-106)
Real-life scheduling using constraint programming and simulation
Authors: Kovács, A.; Váncza, József; Kádár, Botond; Monostori, László; Pfeifer, A.
Editor: Monostori, L; Kádár, B; Morel, G
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 213-218)
Project scheduling approach to production planning
Authors: Márkus, A.; Váncza, József; Kis, T.; Kovács, A.
Date: 2003.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 52, Issue no.: 1, Page: 359-362)
Digital enterprises: first results of a national R&D project
Authors: Monostori, László; Váncza, József; Márkus, A.; Kádár, Botond; Viharos, Zsolt János
Date: 2003.
Published by: Intelligent Robots and Systems, IROS 2003. Proceedings IEEE/RSJ International Conference. Vol. 3 (Page: 2335-2340)

2002.

SZTAKI in PLANET: an introduction
Authors: Monostori, László; Váncza, József
Date: 2002.
Published by: PLANET NEWS (Volume no.: 3, Page: 9-11)
Production management: taking up the challenge of integration
Authors: Erdélyi, F.; Tóth, T.; Somló, J.; Kovács, A.; Kádár, Botond; Márkus, A.; Váncza, József
Editor: Penninger, A; Ziaja, GY; Vörös, G
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest (Page: 705-709)
Digital factories, production networks
Authors: Monostori, László; Haidegger, Géza; Váncza, József; Viharos, Zsolt János
Date: 2002.
Published by: ERCIM NEWS (Volume no.: 51, Page: 53-54)
Digital enterprises: A national R&D project in Hungary
Authors: Monostori, László; Haidegger, Géza; Váncza, József; Viharos, Zsolt János
Editor: Maropoulos, PG
Date: 2002.
Published by: Proceedings of the 1st CIRP(UK) seminar on digital enterprise technology. Durham, 2002. Vol. I. Technical papers. (Page: 269-272)
Constraint feedback in solving incomplete models: a case study in sheet metal bending
Authors: Kovács, A.; Váncza, József
Editor: Vidal, T; Liberatore, P
Date: 2002.
Published by: STAIRS 2002 - Starting Artificial Intelligence Researchers Symposium STAIRS Proceedings (Frontiers in artificial intelligence and applications 78) (Page: 109-118)

2001.

A constraint engine for manufacturing process planning
Authors: Váncza, József; Márkus, A.
Editor: Walsh, T
Date: 2001.
Published by: Principles and practice of constraint programming - CP 2001. 7th international conference. Proceedings. Paphos, 2001. (Lecture notes in computer science, 2239.) (Page: 745-759)
Solving conditional and conflicting constraints in manufacturing process planning
Authors: Váncza, József; Márkus, A.
Date: 2001.
Published by: CP-AI-OR'01. Third international workshop on integration of AI and OR techniques in constraint programming for combinatorial optimization problems. Proceedings. Ashford, 2001. (Page: 97-112)
Product line design with customer preferences
Authors: Márkus, A.; Váncza, József
Editor: Monostori, L; Váncza, J; Ali, M
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. (Lecture notes in artificial intelligence, 2070.) (Page: 846-855)
Process planning with conditional and conflicting advice
Authors: Márkus, A.; Váncza, József
Date: 2001.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 50, Issue no.: 1, Page: 327-330)

1999.

Order selection and scheduling with negotiating agents
Authors: Márkus, A.; Váncza, József
Editor: Tatai, G; Gulyás, L
Date: 1999.
Published by: Agents everywhere. HUNABC '98. Proceedings of the first Hungarian national conference on agent based computing. Budapest, 1998. (Page: 110-117)
Cselekvési tervek generálása. (Artificial intelligence planning methods.)
Authors: Váncza, József
Editor: Futó, I
Date: 1999.
Published by: Mesterséges intelligencia. (Page: 419-456)
Artificial intelligence support in design: a survey
Authors: Váncza, József
Editor: Kals, H; van Houten, F
Date: 1999.
Published by: Integration of process knowledge into design support systems. Proceedings of the 1999 CIRP international design seminar. Enschede, 1999. (Page: 57-68)
Alapvető mesterséges intelligencia technikák. (Fundamental artificial intelligence techniques.)
Authors: Váncza, József; Monostori, László; Egresits, CS
Editor: Horváth, M; Szalay, T
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 1-27)

1998.

Robotic inspection plan optimization by case-based reasoning
Authors: Váncza, József; Horváth, M.; Stankóczi, Z.
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 2, Page: 181-188)
Product line development with customer interaction
Authors: Márkus, A.; Váncza, József
Date: 1998.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 47, Issue no.: 1, Page: 361-364)
Planning in manufacturing domains controlled by case-based reasoning
Authors: Váncza, József
Editor: Aha, D; Daniesl,
Date: 1998.
Published by: Case-based reasoning integrations. (Technical report, WS-98-15.) (Page: 161-165)
Holonic manufacturing with economic rationality
Authors: Váncza, József; Márkus, A.
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems. Lausanne, 1998. (Page: 383-394)
Cooperation via conflicts in manufacturing systems
Authors: Horváth, Miklós; Márkus, A.; Váncza, József
Editor: Baskin, AB; Kovács, G; Jaccucci, G
Date: 1998.
Published by: Cooperative knowledge processing for engineering design. (Page: 307-324)

1997.

Spline interpolation with genetic algorithms
Authors: Márkus, A.; Renner, Gábor; Váncza, József
Date: 1997.
Published by: 1997 international conference on shape modeling and applications. Proceedings. Aizu-Wakamatsu, 1997. (Page: 47-54)
Robotic inspection plan optimization by case-based reasoning
Authors: Váncza, József; Horváth, M[ÁTYÁS]; Stankóczi, Z.
Editor: Monostori, L
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 509-515)
Process planning by retrieval and adaptation
Authors: Márkus, A.; Váncza, József; Horváth, M[ÁTYÁS]
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Issue no.: 1, Page: 47-60)
Mesterséges intelligencia módszerek
Authors: Váncza, József; Monostori, László; Egresits, CS
Editor: Erdélyi, F
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 162-237)
How cases can control planning in resource-rich domains: a case study in robotic inspection planning
Authors: Váncza, József
Editor: Nakatani, Y
Date: 1997.
Published by: Practical use of case-based reasoning. Proceedings of the workshop of the fifteenth international joint conference on artificial intelligence. IJCAI-97. Nagoya, 1997. (Page: 7-18)

1996.

A market approach to holonic manufacturing
Authors: Márkus, A.; Kis, T.; Váncza, József; Monostori, László
Date: 1996.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 45, Issue no.: 1, Page: 433-436)
A market-based control in distributed manufacturing
Authors: Márkus, A.; Váncza, József; Kis, T.
Date: 1996.
Published by: ERCIM NEWS (Issue no.: 26, Page: 37)
Process planning with genetic algorithms on results of knowledge-based reasoning
Authors: Horváth, Miklós; Márkus, A.; Váncza, József
Date: 1996.
Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 9, Issue no.: 2, Page: 145-166)
Experiments with the integration of reasoning, optimization and generalization in process planning
Authors: Váncza, József; Márkus, A.
Date: 1996.
Published by: ADVANCES IN ENGINEERING SOFTWARE (Volume no.: 25, Issue no.: 1, Page: 29-40)
Computational complexity of manufacturing process planning
Authors: Kis, T.; Váncza, József
Editor: Ghallab, M; Milani, A
Date: 1996.
Published by: New directions in AI planning. ( Frontiers in artificial intelligence and applications, 31.) (Page: 299-311)
Controlling distributed manufacturing systems by a market mechanism
Authors: Kis, T.; Váncza, József; Márkus, A.
Editor: Wahlster, W
Date: 1996.
Published by: ECAI '96. 12th European conference on artificial intelligence. Proceedings. Budapest, 1996. (Page: 534-538)
Are nabufacturing agents different?
Authors: Márkus, A.; Váncza, József
Editor: Albayrak, S; Bussmann, S
Date: 1996.
Published by: European workshop on agent-oriented systems in manufacturing. Pre-proceedings. Berlin, 1996. (Page: 42-59)

1995.

A market model of manufacturing control
Authors: Kis, T.; Márkus, A.; Váncza, József
Editor: Krause, FL; Jansen, H
Date: 1995.
Published by: Life cycle modelling for innovative products and processes. Proceedings of the IFIP WG5.3 international conference on life-cycle modelling for innovative products and processes. Berlin, 1995 (Page: 195-206)
A learning approach to spline interpolation
Authors: Márkus, A.; Renner, Gábor; Váncza, József
Editor: Monostori, L
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 58-70)
Process planning for part families
Authors: Márkus, A.; Váncza, József; Horváth, M.
Editor: Monostori, L
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 168-185)
Genetic algorithms in free form curve design
Authors: Márkus, A.; Renner, Gábor; Váncza, József
Editor: Daehlen, T; Lyche, T; Schumaker, LL
Date: 1995.
Published by: Mathematical methods for curves and surfaces (Page: 1-12)
Computational complexity of manufacturing process planning
Authors: Kis, T.; Váncza, József
Editor: Ghallab, M
Date: 1995.
Published by: Preprints of the 3rd European workshop on planning. EWSP' 95. Assisi, 1995 (Page: 319-332)

1994.

Inference and optimization methods for manufacturing process planning
Authors: Márkus, A.; Váncza, József
Editor: Cohn,
Date: 1994.
Published by: ECAI 94. 11th European conference on artificial intelligence. Proceedings. Amsterdam, l994 (Page: 595-599)
Experiments with the integration of reasoning, optimization and generalization in process planning
Authors: Váncza, József; Márkus, A.
Editor: Ishii, K
Date: 1994.
Published by: Computers in engineering 1994. Proceedings of the 1994 ASME international computers in engineering conference and exhibition. Minneapolis, 1994. Vol. 1. (Page: 243-251)
Conflicts in manufacturing systems - a problem setting
Authors: Horváth, Miklós; Márkus, A.; Váncza, József
Editor: Yoshikawa, H; Goossenaerts, J
Date: 1994.
Published by: DIISM '93. Proceedings of JSPE/IFIP TC5/WG5.3 workshop on the design of information infrastructure systems for manufacturing. Tokyo, 1993. (IFIP transactions B-14.) (Page: 265-279)

1993.

Optimization of process plans by genetic algorithms
Authors: Váncza, József; Márkus, A.
Editor: Koch, P
Date: 1993.
Published by: Proceedings of the third conference on artificial intelligence. Budapest, 1993 (Page: 117-122)
Features and the principle of locality in process planning
Authors: Váncza, József; Márkus, A.
Date: 1993.
Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 6, Issue no.: 1-2, Page: 126-136)
Conflicts in manufacturing systems - a problem setting
Authors: Horváth, Miklós; Márkus, A.; Váncza, József
Editor: Yoshikawa, H; Goossenaerts, J
Date: 1993.
Published by: DIISM '93. Preprints of JSPE-IFIP WG 5.3 workshop on the design of information infrastructure systems for manufacturing. Tokyo, l993 (Page: 149-160)

1992.

Lessons of a first-year use of the automated reasoning tool
Authors: Váncza, József; Márkus, A.
Editor: Mittermeier, R
Date: 1992.
Published by: Shifting paradigms in software engineering. Proceedings of the 7th joint conference of the Austrian Computer Society and the John von Neumann Society for Computing Sciences. Klagenfurt, 1992 (Page: 68-79)

New search